![]() ![]() The rest of this process will be completed within the Camera Alignment Wizard. ![]() You should see something similar to this. After verifying that you see an image from the camera, click "Next" to enter the alignment wizard.Choose the same camera you did for the Lens Calibration wizard. In the "Tools" menu, choose "Calibrate Camera Alignment" to start the alignment wizard.Focus your laser based on the material you're using.This should be at least 200mm x 200mm (roughly 8" square), but you may want larger materials for large lasers. ![]() Make sure you have a piece of material you can burn the calibration pattern onto.Make sure your camera is securely mounted and correctly positioned, as described above.You can mount the camera to a movable piece of your laser, like the lid, as long as the position of the camera is the same when you use it as it is when you go through the alignment process. This process tells LightBurn where your camera is in relation to the workspace of your machine.īefore you start, make sure the camera is firmly mounted in the position it will be when using it. Now that the camera is calibrated, you can move on to the next step, camera alignment. Camera DSP GRBL Galvo Tools Camera Alignment ¶ ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |